MATERIAL SAFETY DATA SHEET

Date-Issued:  07/06/2000
MSDS Ref. No:  10067
Date-Revised:  04/03/2003
Revision No:  3

Bumper Magic®

1. PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME:  Bumper Magic®

GENERAL USE:  Automotive reconditioning product

PRODUCT DESCRIPTION:  Silicone based Tire Dressing

PRODUCT CODE:  67

PRODUCT FORMULATION NAME:  Bumper Magic®

CHEMICAL FAMILY:  none

GENERIC NAME:  Solvent Based Silicone Tire Dresssing

 
MANUFACTURER   24 HR. EMERGENCY TELEPHONE NUMBERS
 

Auto Wax Company, Inc.
Auto Magic®
1275 Round Table Drive
Dallas, TX 75247
Product Stewardship: 1-214-631-4000
Transportation: 1-800-826-0828
Auto Wax Company, Inc.
Auto Magic®

   CHEMTREC (U.S.):  
CANUTEC:  
Emergency Phone:  

(800) 424-9300
(613) 996-6666
1-800-826-0828  

COMMENTS: To the best of our knowledge, this Material Safety Data Sheet conforms to the requirements of US OSHA 29 CFR 1910.1200.

2. COMPOSITION / INFORMATION ON INGREDIENTS

Chemical Name Wt.% CAS#   EINECS#
Naphtha(petroleum), hydrotreated heavy (mineral spirits)  <3  64742-48-9  
Distillates (petroleum) hydrotreated light  10 - 15  64742-47-8  

3. HAZARDS IDENTIFICATION

EMERGENCY OVERVIEW

IMMEDIATE CONCERNS: Harmful if swallowed.

POTENTIAL HEALTH EFFECTS

EYES: Substance causes moderate eye irritation.

SKIN: Prolonged or repeated contact may cause skin irritation.

INGESTION: Substance may be harmful if swallowed.

INHALATION: May causes nasal and respiratory tract irritation.

ACUTE TOXICITY: overexposure to vapors may cause headaches, dizziness, confusion and nausea,

MEDICAL CONDITIONS AGGRAVATED: dermititis may be aggravated by excessive exposure to skin.

ROUTES OF ENTRY: include skin contact, skin absorption, eye contact , inhalation and ingestion

TARGET ORGAN STATEMENT: not established

CANCER STATEMENT: not established

4. FIRST AID MEASURES

EYES: Flush eye with water for 15 minutes. Get medical attention.

SKIN: Remove contaminated clothing. Wash with soap and water.

INGESTION: Do not induce vomiting. Seek medical attention immediately.

INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get immediate medical attention.

5. FIRE FIGHTING MEASURES

FLASHPOINT AND METHOD: ~ 46°C (115°F)TCC

FLAMMABLE LIMITS: not available

GENERAL HAZARD: Combustible liquid. Keep away from heat and open flame.

EXTINGUISHING MEDIA: use foam, dry chemical or cabon dioxide extinguisher

HAZARDOUS COMBUSTION PRODUCTS: Carbon Monoxide and Carbon Dioxide

OTHER CONSIDERATIONS: "EMPTY" container retain residue (liquid and/ or vapor) and can be dangerous. Do not expose container to heat, flame, sparks or other sources of ignition.

EXPLOSION HAZARDS: not available

AUTOIGNITION TEMPERATURE: not available

FLAMMABLE LIMIT: not available

SENSITIVE TO STATIC DISCHARGE: not available

SENSITIVITY TO IMPACT: not available

6. ACCIDENTAL RELEASE MEASURES

SMALL SPILL: Contain and collect with absorbent

LARGE SPILL: LARGE SPILLS: Shut off leak if safe to do so. Contain material to avoid run off and collect spill with absorbent.

ENVIRONMENTAL PRECAUTIONS

WATER SPILL: Avoid runoff into storm sewers and ditches which lead to waterways.

7. HANDLING AND STORAGE

GENERAL PROCEDURES: Keep out of reach of Children.

STORAGE: Keep away from open flames and excessive heat.

STORAGE TEMPERATURE: -17°C (0°F) minimum to 38°C (100°F) maximum

SHELF LIFE: one year

ELECTROSTATIC ACCUMULATION HAZARD: Ground and bond containers when transferring material.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

EXPOSURE GUIDELINES:

OSHA HAZARDOUS COMPONENTS (29 CFR 1910.1200)

EXPOSURE LIMITS
OSHA PEL ACGIH TLV Supplier OEL
ppm mg/m3 ppm mg/m3 ppm mg/m3
Naphtha(petroleum), hydrotreated heavy (mineral spirits) TWA 300 1900
Distillates (petroleum) hydrotreated light TWA 300 2300

ENGINEERING CONTROLS: Good general ventilation should be sufficient to control airborne levels.

PERSONAL PROTECTIVE EQUIPMENT

EYES AND FACE: Wear safety glasses with side shields or goggles.

SKIN: Use Nitrile/ Vinyl gloves

RESPIRATORY: NIOSH respirator -(organic vapor) in absence of proper environmental control.

PROTECTIVE CLOTHING: Clean, body-covering clothing

9. PHYSICAL AND CHEMICAL PROPERTIES


ODOR: fruity odor

APPEARANCE: Clear Green Liquid

pH: Not applicable

PERCENT VOLATILE: 10-20

VAPOR PRESSURE: Not Available

VAPOR DENSITY: Not Available

BOILING POINT: ~ 157°C

SOLUBILITY IN WATER: Insoluble

SPECIFIC GRAVITY: ~1.0 gm/ml d25/4


10. STABILITY AND REACTIVITY

STABLE: YES

HAZARDOUS POLYMERIZATION: NO

11. TOXICOLOGICAL INFORMATION

SENSITIZATION: not available

CARCINOGENICITY:

IARC: Listed by IARC- NO

NTP: Listed by NTP- NO

OSHA: Listed by OSHA- NO

12. ECOLOGICAL INFORMATION

ENVIRONMENTAL DATA: not available

ECOTOXICOLOGICAL INFORMATION: not available

13. DISPOSAL CONSIDERATIONS

DISPOSAL METHOD: Dispose in accordance with local, state, and federal laws.

14. TRANSPORT INFORMATION

DOT (DEPARTMENT OF TRANSPORTATION)

PROPER SHIPPING NAME: CONSUMER COMMODITY-ORM-D

TECHNICAL NAME: CONSUMER COMMODITY-ORM-D

PRIMARY HAZARD CLASS/DIVISION: N/A

15. REGULATORY INFORMATION

16. OTHER INFORMATION

PREPARED BY: Tony Casmus

REVISION SUMMARY Revision #: 3

This MSDS replaces the July 24, 2001 MSDS. Any changes in information are as follows:

HMIS RATING
  HEALTH:  -     1   
  FLAMMABILITY:    2   
  PHYSICAL HAZARD:    0   
  PERSONAL PROTECTION:       
NFPA CODES
     

2
 

1

  

0

  
     
 

NFPA STORAGE CLASSIFICATION: Combustible.

MANUFACTURER DISCLAIMER: The information in this MSDS was obtained from current and reputable sources. However, the data is provided without any warranty, express or implied, regarding its correctness or accuracy. It is the user's responsibility both to determine safe conditions for use of this product and to assume liability for loss, injury, damage or expense resulting from improper use of this product.