MATERIAL SAFETY DATA SHEET
![]() |
|
Clay-Magic® (red)
1. PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: Clay-Magic® (red)
PRODUCT DESCRIPTION: Automotive Clay
PRODUCT CODE: CM1200
PRODUCT FORMULATION NAME: Clay-Magic® (red)
GENERIC NAME: Clay
| MANUFACTURER | 24 HR. EMERGENCY TELEPHONE NUMBERS | ||
|---|---|---|---|
Auto Wax Company, Inc. |
CHEMTREC (U.S.): CANUTEC: Emergency Phone: |
(800) 424-9300 | |
COMMENTS: To the best of our knowledge, this Material Safety Data Sheet conforms to the requirements of US OSHA 29 CFR 1910.1200.
2. COMPOSITION / INFORMATION ON INGREDIENTS
| Chemical Name | Wt.% | CAS# | EINECS# | |||
|---|---|---|---|---|---|---|
| Polybutylene | 20 - 40 | 9003-29-6 | ||||
| Calcium Carbonate | 40 - 60 | 471-34-1 | ||||
| Silica | 10 - 30 | 60676-86-0 | ||||
| Pigments/Soluble materials (Trade Secrets) | <5 |
3. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
IMMEDIATE CONCERNS: CAUTION! May cause eye and skin irritation.
POTENTIAL HEALTH EFFECTS
EYES: May be irritating to the eyes.
SKIN: May cause slight irritation.
INGESTION: May be irritating to mouth, throat and stomach.
INHALATION: No hazard in normal industrial use.
MEDICAL CONDITIONS AGGRAVATED:
dermititis may be aggravated by excessive exposure to skin.
ROUTES OF ENTRY: include skin contact, eye contact and ingestion
TARGET ORGAN STATEMENT: not available
CANCER STATEMENT: not available
IRRITANCY: not available
SENSITIZATION: not available
4. FIRST AID MEASURES
EYES: Flush eye with water for 15 minutes. Seek medical attention if irritation persists.
SKIN: Wash with soap and water.
INGESTION: Give plenty of liquids
INHALATION: Move to fresh air
5. FIRE FIGHTING MEASURES
FLAMMABLE CLASS: Material will not burn.
EXTINGUISHING MEDIA: use water, foam, dry chemical or cabon dioxide extinguisher
HAZARDOUS COMBUSTION PRODUCTS: Carbon Monoxide and Carbon Dioxide
EXPLOSION HAZARDS: not applicable
AUTOIGNITION TEMPERATURE: not available
FLASHPOINT: not available
SENSITIVE TO STATIC DISCHARGE: not applicable
SENSITIVITY TO IMPACT: not applicable
6. ACCIDENTAL RELEASE MEASURES
SMALL SPILL: not applicable
LARGE SPILL: not applicable
7. HANDLING AND STORAGE
GENERAL PROCEDURES: Keep out of reach of Children.
STORAGE: Return to original container after use.
SHELF LIFE: one year
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
ENGINEERING CONTROLS: Good general ventilation should be sufficient to control airborne levels.
PERSONAL PROTECTIVE EQUIPMENT
EYES AND FACE: Wear safety glasses with side shields or goggles.
SKIN: Use Nitrile/ Vinyl gloves
RESPIRATORY: none
PROTECTIVE CLOTHING: Clean, body-covering clothing
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: Solid
ODOR: Typical
APPEARANCE: red clay
PERCENT VOLATILE: Not Available
VAPOR PRESSURE: Not Available
VAPOR DENSITY: Not Available
BOILING POINT: Not Available
SOLUBILITY IN WATER: * see comment section
SPECIFIC GRAVITY: ~2 gm/ml
VISCOSITY: Not Available
COMMENTS:
WATER SOLUBILITY: Relatively small portions on or near the surface will dissolve in water during use.
10. STABILITY AND REACTIVITY
STABLE: YES
HAZARDOUS POLYMERIZATION: NO
CONDITIONS TO AVOID: not available
11. TOXICOLOGICAL INFORMATION
SENSITIZATION: not available
TARGET ORGANS: not available
CARCINOGENICITY:
IARC: Listed by IARC- NO
NTP: Listed by NTP- NO
OSHA: Listed by OSHA- NO
MUTAGENICITY: not available
REPRODUCTIVE EFFECTS: not available
NEUROTOXICITY: not available
12. ECOLOGICAL INFORMATION
ENVIRONMENTAL DATA: not available
ECOTOXICOLOGICAL INFORMATION: not available
13. DISPOSAL CONSIDERATIONS
DISPOSAL METHOD: Dispose in accordance with local, state, and federal laws.
14. TRANSPORT INFORMATION
DOT (DEPARTMENT OF TRANSPORTATION)
PROPER SHIPPING NAME: NOT REGULATED
PRIMARY HAZARD CLASS/DIVISION: N/A
OTHER SHIPPING INFORMATION: Not dangerous material according to CFR49 regulations
15. REGULATORY INFORMATION
16. OTHER INFORMATION
PREPARED BY: Tony Casmus
REVISION SUMMARY
Revision #: 4
This MSDS replaces the July 30, 2001 MSDS. Any changes in information are as follows:
|
| |||||||||||||||||||||||||||||||||||||||||
MANUFACTURER DISCLAIMER: The information in this MSDS was obtained from current and reputable sources. However, the data is provided without any warranty, express or implied, regarding its correctness or accuracy. It is the user's responsibility both to determine safe conditions for use of this product and to assume liability for loss, injury, damage or expense resulting from improper use of this product.