MATERIAL SAFETY DATA SHEET

Date-Issued:   07/07/2000 MSDS Ref. No:   10053 Date-Revised:   08/23/2004 Revision No:   1

Fallout Remover

1. PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME:  Fallout Remover

PRODUCT DESCRIPTION:  Fallout Remover

PRODUCT CODE:  53

PRODUCT FORMULATION NAME:  Fallout Remover

COMMENTS: To the best of our knowledge, this Material Safety Data Sheet conforms to the requirements of US OSHA 29 CFR 1910.1200.

2. COMPOSITION / INFORMATION ON INGREDIENTS

COMMENTS: Product composition ranges shown are typical values for health, safety and environmental use and are not intended as specification.

3. HAZARDS IDENTIFICATION

EMERGENCY OVERVIEW

IMMEDIATE CONCERNS: Caution! Causes Eye And Skin Irritation. Harmful or fatal if swallowed

POTENTIAL HEALTH EFFECTS

EYES: Irritating, and may injure eye tissue if not removed promptly.

SKIN: Prolonged or repeated contact may cause skin irritation and chemical burns.

INGESTION: This material may be harmful or fatal if swallowed.

INHALATION: May causes nasal and respiratory tract irritation.

SIGNS AND SYMPTOMS OF OVEREXPOSURE

EYES: Eye contact may cause burns, irritation, tearing and corneal damage.

SKIN: Repeated or prolonged skin contact may cause redness and irritation.

INGESTION: Ingestion may cause nausea and irritation.

INHALATION: Prolongled inhalation of vapors may cause irrition to nasal and respiratory tract.

CHRONIC: not available

CARCINOGENICITY: not available

MEDICAL CONDITIONS AGGRAVATED: not available

ROUTES OF ENTRY: include skin contact, eye contact and ingestion

TARGET ORGAN STATEMENT: not available

CANCER STATEMENT: not available

SENSITIZATION: not available

4. FIRST AID MEASURES

EYES: Flush eye with water for 15 minutes. Get medical attention.

SKIN: Remove contaminated clothing. Wash with soap and water.

INGESTION: If swallowed, do NOT induce vomiting. Give victim a glass of milk. Call a physician or poison control center immediately. Never give anything by mouth to an unconscious person.

INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get immediate medical attention.

ADDITIONAL INFORMATION: Ingestion of a few ounces may be fatal. Acute oxalic poisoning causes severe corrosion of the mouth, throat, and digestive tract with vomiting, abdominal pain, collapse and convulsions.

5. FIRE FIGHTING MEASURES

FLASHPOINT AND METHOD: Not Available

FLAMMABLE LIMITS: Not Available

FLAMMABLE CLASS: Material will not support combustion.

EXTINGUISHING MEDIA: use water, foam, dry chemical or cabon dioxide extinguisher

HAZARDOUS COMBUSTION PRODUCTS: Carbon Monoxide and Carbon Dioxide

EXPLOSION HAZARDS: not available

AUTOIGNITION TEMPERATURE: not available

FLAMMABLE LIMIT: not available

SENSITIVE TO STATIC DISCHARGE: not available

SENSITIVITY TO IMPACT: not available

6. ACCIDENTAL RELEASE MEASURES

SMALL SPILL: Neutralize spill. Contain and collect with absorbent.

LARGE SPILL: LARGE SPILLS: Shut off leak if safe to do so. Contain material to avoid run off, neutralize material and collect spill with absorbent.

ENVIRONMENTAL PRECAUTIONS

WATER SPILL: Avoid runoff into storm sewers and ditches which lead to waterways.

GENERAL PROCEDURES: Do not get in eyes, on skin or clothing.

7. HANDLING AND STORAGE

GENERAL PROCEDURES: Keep out of reach of Children.

STORAGE: Do not allow to freeze

STORAGE TEMPERATURE: (45°F) minimum to (100°F) maximum

SHELF LIFE: one year

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

EXPOSURE GUIDELINES:

OSHA HAZARDOUS COMPONENTS (29 CFR 1910.1200)

ENGINEERING CONTROLS: Good general ventilation should be sufficient to control airborne levels.

PERSONAL PROTECTIVE EQUIPMENT

EYES AND FACE: Wear safety glasses with side shields or goggles.

SKIN: Use Nitrile/ Vinyl gloves/ rubber

RESPIRATORY: NIOSH respirator -(acid vapor) in absence of proper environmental control.

PROTECTIVE CLOTHING: Clean, body-covering clothing and chemical resistent apron

OTHER USE PRECAUTIONS: Facilities storing or utilizing this material should be equipped with an eyewash facility.

9. PHYSICAL AND CHEMICAL PROPERTIES

PHYSICAL STATE: Liquid

ODOR: Typical

APPEARANCE: Clear Liquid

pH: <2

PERCENT VOLATILE: 90

VAPOR PRESSURE: Not Available

VAPOR DENSITY: Not Available

BOILING POINT: Not Available

FREEZING POINT: ~ 0°C (32°F)

SOLUBILITY IN WATER: 100 %

SPECIFIC GRAVITY: ~1.03 gm/ml d25/4

10. STABILITY AND REACTIVITY

STABLE: YES

HAZARDOUS POLYMERIZATION: NO

11. TOXICOLOGICAL INFORMATION

ACUTE

not available

SENSITIZATION: not available

SUBCHRONIC:

not available

CARCINOGENICITY:

IARC: Listed by IARC- NO

NTP: Listed by NTP- NO

OSHA: Listed by OSHA- NO

MUTAGENICITY: not available

REPRODUCTIVE EFFECTS: not available

NEUROTOXICITY: not available

TERATOGENIC EFFECTS: not available

12. ECOLOGICAL INFORMATION

ENVIRONMENTAL DATA: not available

ECOTOXICOLOGICAL INFORMATION: not available

GENERAL COMMENTS: All ingredients are considered biodegradable.

13. DISPOSAL CONSIDERATIONS

DISPOSAL METHOD: Dispose in accordance with local, state, and federal laws.

14. TRANSPORT INFORMATION

DOT (DEPARTMENT OF TRANSPORTATION)

PROPER SHIPPING NAME: CORROSIVE LIQUID, ACIDIC, ORGANIC,N.O.S., (CONTAINING OXALIC ACID)

TECHNICAL NAME: CORROSIVE LIQUID, ACIDIC, ORGANIC,N.O.S., (CONTAINING OXALIC ACID)

PRIMARY HAZARD CLASS/DIVISION: 8

UN/NA NUMBER: 3265

PACKING GROUP: lll

15. REGULATORY INFORMATION

UNITED STATES

DOT LABEL SYMBOL AND HAZARD CLASSIFICATION

DOT Corrosive

CANADA

WHMIS HAZARD SYMBOL AND CLASSIFICATION

WHMIS Corrosive

WHMIS Toxic

16. OTHER INFORMATION

PREPARED BY: Tony Casmus

REVISION SUMMARY Revision #: 1

This MSDS replaces the February 22, 2001 MSDS. Any changes in information are as follows: