MATERIAL SAFETY DATA SHEET

Date-Issued:   02/29/2000 MSDS Ref. No:   96 Date-Revised:   08/23/2004 Revision No:   1

Magic Mist™

1. PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME:  Magic Mist™

PRODUCT DESCRIPTION:  Instant Detailer with Carnauba

PRODUCT CODE:  96

PRODUCT FORMULATION NAME:  Magic Mist™

CHEMICAL FAMILY:  N/A

GENERIC NAME:  Instant Detailer

COMMENTS: To the best of our knowledge, this Material Safety Data Sheet conforms to the requirements of US OSHA 29 CFR 1910.1200.

2. COMPOSITION / INFORMATION ON INGREDIENTS

COMMENTS: Product composition ranges shown are typical values for health, safety and environmental use and are not intended as specification.

3. HAZARDS IDENTIFICATION

POTENTIAL HEALTH EFFECTS

EYES: Moderately irritating to the eyes.

SKIN: Non-irritating to the skin.

INGESTION: Small amounts (a tablespoonful) swallowed during normal handling operations are not likely to cause injury; swallowing amounts larger than that may cause injury.

INHALATION: No hazard in normal industrial use.

ACUTE TOXICITY: May cause headaches and dizziness.

ROUTES OF ENTRY: include skin contact, eye contact and ingestion

TARGET ORGAN STATEMENT: not established

CANCER STATEMENT: not established

4. FIRST AID MEASURES

EYES: Immediately flush eyes with plenty of water. Get medical attention, if irritation persists.

SKIN: Wash with soap and water.

INGESTION: If swallowed, do NOT induce vomiting. Give victim a glass of milk. Call a physician or poison control center immediately. Never give anything by mouth to an unconscious person.

INHALATION: Move to fresh air

5. FIRE FIGHTING MEASURES

FLAMMABLE CLASS: Material will not burn.

EXTINGUISHING MEDIA: Use alcohol foam, carbon dioxide, or water spray when fighting fires involving this material.

6. ACCIDENTAL RELEASE MEASURES

SMALL SPILL: Contain and collect with absorbent

LARGE SPILL: LARGE SPILLS: Shut off leak if safe to do so. Contain material to avoid run off and collect spill with absorbent.

ENVIRONMENTAL PRECAUTIONS

WATER SPILL: Avoid runoff into storm sewers and ditches which lead to waterways.

7. HANDLING AND STORAGE

GENERAL PROCEDURES: Keep out of reach of Children.

STORAGE TEMPERATURE: 0°C (32°F) minimum to 50°C (122°F) maximum

SHELF LIFE: one year

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

EXPOSURE GUIDELINES:

OSHA HAZARDOUS COMPONENTS (29 CFR 1910.1200)

ENGINEERING CONTROLS: Good general ventilation should be sufficient to control airborne levels.

PERSONAL PROTECTIVE EQUIPMENT

EYES AND FACE: Wear safety glasses with side shields or goggles.

SKIN: Use Nitrile/ Vinyl gloves

RESPIRATORY: NIOSH respirator -(organic vapor) in absence of proper environmental control.

PROTECTIVE CLOTHING: Clean, body-covering clothing

9. PHYSICAL AND CHEMICAL PROPERTIES

ODOR: Banana odor

APPEARANCE: Cloudy yellow liquid

pH: ~6 to 9

BOILING POINT: ~ (212°F)

FREEZING POINT: ~ (32°F)

SPECIFIC GRAVITY: ~1.0

MOLECULAR FORMULA: N/A

(VOC): >2 % by weight

10. STABILITY AND REACTIVITY

STABLE: YES

HAZARDOUS POLYMERIZATION: NO

CONDITIONS TO AVOID: None.

STABILITY: Stable.

POLYMERIZATION: Product will not undergo polymerization.

HAZARDOUS DECOMPOSITION PRODUCTS: none expected

INCOMPATIBLE MATERIALS: not established

11. TOXICOLOGICAL INFORMATION

SENSITIZATION: not established

TARGET ORGANS: not established

CARCINOGENICITY:

IARC: Listed by IARC- NO

NTP: Listed by NTP- NO

OSHA: Listed by OSHA- NO

MUTAGENICITY: not available

REPRODUCTIVE EFFECTS: not available

12. ECOLOGICAL INFORMATION

ENVIRONMENTAL DATA: not available

ECOTOXICOLOGICAL INFORMATION: not available

13. DISPOSAL CONSIDERATIONS

DISPOSAL METHOD: Dispose in accordance with local, state, and federal laws.

14. TRANSPORT INFORMATION

DOT (DEPARTMENT OF TRANSPORTATION)

PROPER SHIPPING NAME: NOT REGULATED

TECHNICAL NAME: NOT REGULATED

PRIMARY HAZARD CLASS/DIVISION: N/A

OTHER SHIPPING INFORMATION: Not dangerous material according to CFR49 regulations

15. REGULATORY INFORMATION

CANADA

WHMIS HAZARD SYMBOL AND CLASSIFICATION

WHMIS Toxic

16. OTHER INFORMATION

PREPARED BY: Anthony Casmus

REVISION SUMMARY Revision #: 1

This MSDS replaces the February 21, 2001 MSDS. Any changes in information are as follows:

MANUFACTURER DISCLAIMER: The information in this MSDS was obtained from current and reputable sources. However, the data is provided without any warranty, express or implied, regarding its correctness or accuracy. It is the user's responsibility both to determine safe conditions for use of this product and to assume liability for loss, injury, damage or expense resulting from improper use of this product.