| Page 1 = Jump Starts Hand Carried |
| Page 2 = Jump Starts Commercial/Wheeled Units |
Professional Wheeled Unit
 |
Model
2001 Model
3001 |
| Simple in design,
rugged in performance, K&K's heavy duty units service gas and
diesel powered fleets, new car lots, used car lots, body shops, construction
sites, and more! If you require frequent jump starts and ease of use, choose a unit from our commercial line to fulfill your needs. |
| The
2001 is a commercial-grade, heavy duty battery charger and
jump starter designed to maximize space and deliver convenience
in the shop. It features 5' retractable jumper cable leads made
of #2 gauge welding cable and a heavy-duty 10 amp charger, all in
an easy to maneuver, space-saving design. |
 |
| The 3001 replaces three common items used in a garage: jumper cables, battery chargers, and air tanks. Seeking to save our customers both space and labor cost, K&K designed the 3001 with 5 ft. retractable jumper cables, a heavy duty 10 amp charger, and an automatic shut-off air compressor (not an air tank which is often empty). In less than 2 minutes, the 150 psi compressor inflates a 14" car tire and shuts off! |
| Product | Model 2001 (w/o Air) | Model 3001 (w/Air) |
| Air Compressor | |
|
| Battery Charger | |
|
| Battery Type | (Not Included) |
(Not Included) |
| Cable Length | |
|
| Cable Type | |
|
| Tire Type | |
|
| Indicator Display | |
|
| Unit Weight | |
|
The Big Boy ! 12/24 Heavy Truck Unit
 |
Model
HT1224 Price - $1385.00 *See Product Specification Table Below* |
| The
undisputed heavy weight champion of jump starters/chargers. K&K’s
units pack the punch power to spin a starter instantly in the coldest
of temperature. Units deliver the raw power necessary to spin the
starter on semi-trucks, construction equipment, or any large diesel/gas
engine. Each unit delivers hard powerful cranking amps, first time
- every time. No more wasted time with fickle gas powered jump starters. Which sometimes start, and sometimes do not. Who needs that headache! Most gas powered jump starters only deliver 300 amps to the disabled batteries, and that doesn’t get the job done, especially in cold temperatures. The large 2 battery wheeled units deliver 1500 cranking amps at the grips. The 4 battery Fixed Mount Units punch out 2400 cold cranking amps at the grips. Rugged, dependable, and durable describe the heavy truck and fixed mount units. The Fixed Mount Unit 4 battery model (12 volt) was originally custom deigned for JB Hunt Transport road service vehicles. This unit significantly reduces maintenance costs associated with jump starting line haul tractors. |
|
12/ 24 Heavy Truck Model. The "Big Boy" of the wheeled jump starters/chargers. Wheeled units are manufactured for heavy duty applications where raw power is needed to start equipment. Ideal for starting semi-trucks, construction equipment, diesel farm equipment, and any large diesel or gas engine. Case is single piece construction - extra thick polyethylene which is high impact resistant and impervious to fuel and solvents. Extra wide pneumatic tires for ease of rolling on rough surfaces. The 12/24 Volt Model quickly converts to desired voltage via quick lock connectors, located on top of units. Heavy duty 10 Amp industrial
charger (#319010) automatically shuts off to prevent overcharging
batteries. Units also function as a battery charger. To recharge
unit or dead batteries, plug the power cord into an AC outlet. Unit
must be in 12 volt mode when recharging batteries. Batteries are
securely locked in position by special hold-down restraints.
|
| Product | Model HT1224 "Big Boy" Heavy Truck Charger/Starter | |
| Cold Cranking Amps | |
800 (24-Volt Mode) |
| Battery Charger | |
|
| Group Battery Type | (Included) |
|
| Cable Length | |
|
| Cable Type | |
|
| Tire Type | |
|
| Indicator Display | |
|
| Unit Weight | |
|
Fixed Mounted Unit
 |
Model
FMB1224 Price - $1860.00 *See Product Specification Table Below* |
|
Finally a jump starter/charger tailor made to fit the needs of the towing/heavy duty transportation industry. Units equipped with two recharging methods: recharge from the vehicle alternator or AC power cord on the unit. The alternator charging wiring system is composed of two 25’ - #4 welding cables, shrink wrapped every 60 inches. The 4 battery Fixed Mount Unit delivers 1800 cold cranking amps at the end of 4/0 welding cable. The heavy duty 10 amp industrial charger automatically shuts off when batteries are charged. Industrial grips supply power on both jaw sides doubling the electrical contact area for maximum starting amps. Water-tight restrainers firmly hold cables and protect against moisture entry. A high strength case (cross link polyethylene) houses all components. Louvered case vents circulate air. Case features an upper drawer for storing cables, with key lock security. Molded case handles for ease in handling/positioning unit. All units feature a volt gauge (#310290) and amp gauge (#310260) providing the user with precise information on unit status. |
| Product | Model FMB1224 (Fixed Mounted) Charger/Starter | |
| Cold Cranking Amps | |
900 (24-Volt Mode) |
| Battery Charger | |
|
| Group Battery Type | (Included) |
|
| Cable Length | |
|
| Cable Type | |
|
| Indicator Display | |
|
| Unit Weight | |
|
PAGE (1)(2)(3)
(4) (5) (6) (7) (8) (9) (10)
Text Menu
You May Fax Your Order at 1-717-664-2884
Please Enter Part Number and Description
of Each Item you wish to purchase....
Make sure to enter all details pertaining to this
order!
CLICK HERE FOR ORDERING INSTRUCTIONS
View Order Information | Clear This Order | Complete Order and Checkout
